Electrical Repair in Houston, TX

Symptoms & quick checks

A few quick checks can save you time. If these don’t solve it, call us and we’ll take it from there.

• Breaker keeps tripping. Flip it fully OFF, then ON. If it trips again, stop resetting—there may be an overload or fault.
• GFCI won’t reset / outlets dead. Find any GFCI in the kitchen, bath, garage, or outside; press RESET. Still dead? We’ll test the circuit and devices.
• Lights flicker or dim. Often loose connections, a failing driver, or an overloaded circuit.
• Half the house is out. That’s a partial outage—call us. If you smell burning or see smoke, call 911 first.
• Warm outlets/switches or a buzzing panel. Switch off the circuit and call—heat or buzzing points to a poor connection.

Want a licensed electrician to talk you through it? Call now.

What we repair (today)

Breakers, GFCI & AFCI

Nuisance tripping, worn or mis-sized breakers, ground/arc-fault diagnostics and replacement, panel load checks to prevent repeat trips.

Outlets & switches

Dead outlets, reversed polarity, back-stabbed wiring, smart/dimmer/3-way/4-way conversions, USB-C and tamper-resistant upgrades.

Lighting & ceiling fans

Flicker, hum, ballast/driver failures, LED/recessed retrofits, ceiling fan installs and balance fixes.

Electrical panel & main service issues

Overheating lugs, burnt bus stabs, corrosion, double-taps, main breaker problems, labeling corrections.
(Need a full panel upgrade? We’ll scope it properly and schedule.)

Partial power / brownouts

Lost leg diagnostics, meter base/main issues, utility coordination when the problem starts outside.

Dedicated & appliance circuits

HVAC, microwave, refrigerator, sump, freezer, garage tools—fix trips on startup and size circuits correctly.

Smoke & CO detectors

Hardwired installs, interconnection, code-interval replacements.

Wiring faults

Shorts and ground faults, open neutrals, loose terminations, aluminum branch-circuit pigtailing and remediation.

Surge protection

Whole-home surge protectors and point-of-use recommendations to safeguard electronics.

Not sure what it’s called? Describe the symptom and we’ll translate. Call now.

Pricing, warranty & scheduling

• Upfront, itemized pricing before any work starts.
• Options, not pressure. If there’s more than one safe fix, you choose.
• Workmanship warranty on our repairs; parts carry manufacturer coverage.
• Fast scheduling. Same-day or next-day for most home repairs. For urgent hazards, see our Emergency Electrician page.

Prefer a quick ballpark first? We’re happy to give ranges by phone. Call us.

Our repair process

1. Diagnosis — Metered testing, visual inspection, and load checks.
2. Plain-English findings — What failed, why it matters, and your safest options.
3. Permits (if needed) — We handle code paperwork when required.
4. Repair — Clean, code-compliant work with rated parts.
5. Verification — We test under load and label as needed.
6. Cleanup & follow-up — We tidy up and email your receipt/warranty.

Safety & permits

Electrical work must meet the NEC and local amendments. Some repairs (new circuits, certain panel work) may require permits and inspections—we’ll advise on site and handle them when needed.

If you ever see smoke, fire, or melting plastic odor, call 911 first, then call us.

Have permit or HOA questions? Talk to a licensed electrician.

FAQ’s

Areas we serve

We repair homes across Houston and nearby suburbs, including Katy, Sugar Land, The Woodlands, Spring, Cypress, Pearland, and League City.